Dehumidifier large hire

Tool hire charges (in £'s)


Whether there’s a need for fast, reliable and energy-efficient drying, In new building construction, in renovation or alteration of existing buildings, or in special circumstances such as flooding, there’s no quicker, surer or more economical way to reduce moisture without risk of damage to the building materials.

 Air is drawn into the dehumidifier by means of a fan. The moisture is then condensed from the air and piped away or collected in a container. The dry air is heated with the energy recovered during the drying phase and returned to the room. This process lowers the relative humidity of the air, increasing it’s capacity to absorb more moisture from surrounding surfaces. .

Reliable Performance

No matter how extreme the conditions, All units operate economically even on the coldest winter day – and where dampness is really severe, up to 30 litres of water can be extracted from the atmosphere in just 24 hours using the BD150

Operational Simplicity

Simplicity of operation is one of the major benefi ts of the EIP Ltd range. To dry out any building you need only to check that all doors and windows are closed, wheel the unit to a convenient location, connect to the supply and press the start button. Drainage of condensate from the machine is equally simple – either by connecting a hose to the drainage spout and leading it to a drain, or by placing a container under the spout.

A Versatile Product

Differing circumstances present different problems – but Building Dryers have been designed to provide an effective solution whatever the situation. In newly built or partially completed buildings,  Dryers enable interior plaster, screeds and timberwork to be dried at a controlled rate.

110V/230V Dual Voltage .
External Voltage Selection Switch.
Internal Voltage Protection.
High Capacity, Reverse Cycle Defrsot For Low Temperature Operations.
Power 1.5kW Maximum.
Running Costs Approximately 8p per hr.
Extraction Rate Approximately 30ltrs per 24hrs